X

Fixed

IPS e.max®

IPS e.max® quickly became a restorative material that both dental labs and dental clinicians knew we could trust. Myron's Dental Laboratories is proud to offer this highly esthetic, all-ceramic crown and bridge product. Due to its exceptional formulation, this lithium disilicate is the most esthetic material currently on the market. Our team is able to craft this fixed solution either as a full-contour monolithic or cut-back and layered with porcelain. This glass-ceramic is 2.5 to 3 times stronger than available materials. It offers maximum flexibility as it is formulated to have additional impulse ingots. Through the use of this incredible material, paired with our expert fabrication techniques, our IPS e.max® restorations reduce the risk of fracture and rarely need chairside adjustments.

Features

  • Highly Customizable
  • Up to 500 MPa
  • Fracture-Resistant
IPS Anterior

Interested in Receiving
Product Specials?

Loading...

IPS e.max® can be used for veneers, inlays and onlays, occlusal veneers, partial crowns, minimally invasive crowns, implant superstructures, hybrid abutment solutions, and three-unit bridges up to the second premolar as the terminal abutment. 

Bridges which include molars, Maryland style bridges, and bridges which have a short vertical height that does not allow for adequate connector height.

Anterior full-coverage crowns require a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Facial reduction is 1.5 – 2 mm; 1 – 1.5 mm lingual contact clearance. Incisal reduction is 1.5 – 2 mm with rounded internal line angles, and an incisal edge at least 1mm wide to permit optimum milling of the incisal edge during CAD/CAM processing. Posterior full-coverage crown requires a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Occlusal reduction is 1.5 – 2 mm: axial reduction (buccal, lingual, and interproximal) is 1.5 mm with rounded internal line angles.

IPS e.max® may be cemented using a resin reinforced glass ionomer such as RelyX Luting cement. When a greater bond is needed do to the lack of a retentive preparation, use resin cement like RelyX Unicam or RelyX Ultimate.

If adjustments are needed, use fine diamonds with water and light pressure. Always remove the crown when adjusting or bond/cement crown before adjustments are made.).

  • D2740 Crown
    • ,
  • D2610 Inlay for 1 surface
    • ,
  • D2620 Inlay for 2 surfaces
    • ,
  • D2630 Inlay for 3 surfaces
    • ,
  • D2962 Labial Veneer
    • ,
  • D2783 Crown 3/4 Porcelain Ceramic (does not include veneers)